///CROSBY SWIVEL HOOKS S-322CN / S-322AN

CROSBY SWIVEL HOOKS S-322CN / S-322AN

CROSBY SWIVEL HOOKS S-322CN / S-322AN

Forged – Quenched and Tempered.
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 97-98. Even years after purchase of the priginal hook, latch assemblies can be added.

Description

 

  • Forged – Quenched and Tempered.

 

 

 

  • Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.

 

 

 

  • Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added.

 

 

 

  • Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 97-98. Even years after purchase of the priginal hook, latch assemblies can be added.

 

 

 

  • Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 88 for proper Hook Identification Codes.

 

 

 

  • Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:

 

 

 

  • Deformation Indicators –– Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload.

 

 

 

  • Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.

 

 

 

 

This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 93, 95,

103, 106, 111-115. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c) 2000.

  • U.S. Patents 5,381,650 & 5,193,480 & 5,103,755 and foreign equivalents.

 

 

Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit.

Designed with a 5 to 1 safety factor.
Alloy swivel hooks 1.25tA-31.5tA : proof load is 2.5 times working load limit.
Designed with a 4 to 1 safety factor.
† Dimensions for hooks 3/4 ton carbon thru 22 ton alloy are for S-4320 latch kits.
Dimensions for hooks 31.5 ton alloy are for PL latch kit.

Working Load
Limit
DOR(t)*

NrM Carbon S-332CN Stock No.

NrM.
Carbon S-332AN Stock No.

Weight Each
(kg)

Dimensions (mm)

carbon

Alloy

A

B

C

D

F

G

H

J

K

L

M

O

R

S

AA

0.75

1.25

1048600

1048804

0.34

51.0

20,8

31,8

72,5

31,8

18,5

20,6

23,6

16,0

144

16,0

23,6

116

9,65

38,1

1

1.60

1048609

1048813

0.57

63.5

33,3

38,1

80,0

35,1

21,3

23,9

24,6

18,0

170

18,0

24,6

136

12,7

50,8

1.6

2.50

1048618

1048822

1.02

73.0

38,1

44,5

91,0

38,1

25,4

29,5

26,9

22,4

197

22,4

26,9

155

16,0

50,8

2

3,20

1048627

1048831

1.04

73.0

38,1

44,5

102

41,1

28,7

33,3

30,2

23,9

210

23,9

29,5

165

16,0

50,8

3,2

5,4

1048636

1048837

2.25

89.0

41,7

50,8

123

51,0

36,6

41,4

38,1

33,3

246

28,7

35,8

191

19,1

63,5

5

8.0

1048645

1048854

4.67

116

58,0

63,5

160

63,5

46,0

52,5

45,2

42,2

317

36,6

42,9

245

25,4

76,2

7.5

11.5

1048654

1048865

7.34

127

64,5

70,0

192

76,0

57,0

67,0

51,0

47,8

375

41,4

56,5

289

28,7

101

10

16

1048666

1048877

10.5

143

63,0

79,0

212

82,5

66,0

74,5

66,5

55,5

417

49,3

61,0

311

31,8

101

15

22

1048672

1048886

21.3

180

95,5

104

263

108

76,0

89,0

86,5

68,5

542

60,5

81,0

424

38,1

127

31.5

1048688

32.0

180

95,5

104

346

127

93,0

118

102

72,5

590

76,2

82,6

459

38,1

165

 

* NOTE: Carbon swivel hooks ,75tC-15tC: proofloads is 2 times working load limit. Designed with a 5 to 1 safety factor. Alloy swivel hooks 1,5tA-22tA: proofload is 2,5 times working load limit. Designed with a 4 to 1 safety factor.
Alloy swivel hooks 31.5LA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.

Reviews

There are no reviews yet.

Be the first to review “CROSBY SWIVEL HOOKS S-322CN / S-322AN”